OPW Civacon 8300系列熱感應裝車控制器
OPW Civacon 8300系列能夠在物料超過預定液位時自動報警，也能對迫近的溢流狀況發出報警。
- 采用標準的熱感應信號格式與機載控制監視器或運輸工具上的有關熱感應系統進行通信。
- 可以與多達6個（也可定制為8個）熱感應液位傳感器或機載監視器一起使用。
- 可監控雙線熱—光Quick Start（快速啟動）可互換傳感器。
8300系列共有兩種型號
8340
防爆型熱感應監視器帶有容許/非容許狀態指示燈，及插鍵式旁路開關。
8360
防爆型熱感應監視器帶有容許/非容許狀態指示燈，及插鍵式旁路開關和接地確認功能。
在8360監視器中，過量灌裝檢測和接地確認信號是分別發送到泵的控制系統中去的。
8300 Series Thermistor Rack Monitors
The 8300 Series provides automatic warning of product overflow at predetermined levels andmwarns of impending overflow conditions.
- Uses the standard thermistor signal format to
communicate with an onboard control monitor
or straight thermistor system on transports.
- Can be used with as many as six (available
option of eight) thermistor liquid-level sensors
or onboard monitors
- Monitors two-wire Thermo-optic Quick Start
replacement sensors
The 8300 Series is available in two models:
8340
Explosion-proof Thermistor Monitor with permissive and non-permissive status lights with keyed bypass switch.
8360
Explosion-proof Thermistor Monitor with permissive and non-permissive status lights with keyed bypass switch and ground verification.
In the 8360 monitor, the overfill detection and ground verification are signaled to the pump-control system separately.
8300系列熱敏電阻裝車控制器—規格
操作溫度：-40oF~158oF(-40oC~70oC)
輸入要求：120 VAC 60 Hz
10VA（標準）；可提供240 VAC
輸出繼電器觸點：240 VAC – 5A DPDT
響應時間：不超過0.5秒（干-濕轉換過程）
電氣連接：內置接線端子板
外殼：NEMA 7防爆型
殼體材質：鋁合金
重量：
8340型– 32 lbs,
8360型– 32 lbs.
認證：FM,CSA
|
